· Orqestra Team · 8 min read

How to Make a Digital Menu Board With a TV in 2026

How to build a digital menu board with a TV: pick the screen, choose a Fire TV or Android TV player, follow design rules, sync prices from your POS, and test.

A digital menu board is a TV on the wall that shows your menu from a small player (a built-in smart TV app, a streaming stick, or a browser page) instead of printed panels. You can build one for under $200 per screen using a consumer 4K TV and the Fire TV or Android TV app from your menu software, and the whole job for a 3-screen counter takes an afternoon once the TVs are mounted. The steps below cover the TV, the mount, the player, the design rules, syncing prices with your POS, scheduling dayparts, and testing.

Step 1: Pick the TV

  1. Size. Match the screen to the viewing distance. Behind a counter where guests stand 8 to 12 feet away, 43 inches is the usual minimum and 50 or 55 inches is comfortable. Measure the wall first: three 43-inch screens side by side need about 9.5 feet of width with small gaps.
  2. Consumer vs commercial. A consumer TV is cheap and fine for a shop open 10 to 12 hours a day. On Amazon on 2026-10-27, a 43-inch Insignia F50 4K Fire TV listed at $149.99, a 43-inch Roku Select at $199.99, and a 43-inch Samsung M70H at $247.99 (Amazon 43-inch 4K TV listings). A commercial display is rated for long duty cycles and is brighter: the Samsung BE43D-H is listed as "capable of 16/7 operation" at 300 nits and was $742.39 at Quill on 2026-10-27 (Quill, Samsung BE43D-H). Pay the premium if the screen runs 16+ hours a day, faces a sunny window, or needs to hang in portrait.
  3. Orientation. Most menu boards are landscape. Portrait works for a narrow wall or a single-column drink list, but consumer TVs are not always warranted for portrait mounting and many smart-TV apps only render landscape. If you need portrait, confirm both the TV and the player app support it before you buy.

Step 2: Mount it and get power to it

  1. Buy a mount rated for the TV's weight and VESA pattern. On Amazon on 2026-10-27, an Amazon Basics full-motion mount for 26 to 55-inch TVs was $20.99 and a low-profile tilt mount was $19.39 (Amazon TV wall mount listings). A tilt mount is enough for a menu board; full-motion only matters if you need to swing the screen to reach the ports.
  2. Find the studs and use the lag bolts that come with the mount. Drywall anchors alone are not enough for a 43-inch TV over a counter.
  3. Put an outlet behind each TV or run a surge-protected power strip in a cable raceway. A streaming stick also needs its own USB power; the HDMI port on most TVs does not supply enough.
  4. Add a tilt of 5 to 10 degrees downward if the screen sits above eye level.

Step 3: Choose the player

The player is the thing that runs the menu software. You have four options.

Player optionWhat it isTypical cost per screenProsCons
Built-in Fire TV or Google TVThe smart TV's own app store (Insignia, Toshiba, Hisense, TCL, Sony and others ship with one)$0 extraNothing to hide behind the TV, one remoteCheaper TVs can be slow; the TV must stay on the app after a power cut
Fire TV StickAmazon's HDMI stick: Fire TV Stick HD $39.99, 4K Select $49.99, 4K $59.99, 4K Plus $69.99, 4K Max $84.99 on amazon.com on 2026-10-27 (Amazon Fire TV Stick listings)$40 to $85Works on any TV with HDMI, easy to replaceSome 2025 and 2026 models run Vega OS, not Fire OS, and Amazon's spec sheet lists no Android level for them (Amazon Fire TV device specs), so check that your menu app supports the exact model
Google TV StreamerGoogle's Android TV box, $149.99 on the Google Store on 2026-10-27 (Google TV Streamer)$150Full Android TV, Ethernet port, fastCosts as much as a cheap TV
Browser URLA web page your menu software hosts, opened in the TV's browser or a mini PC$0 to $200Works on almost anythingTV browsers forget the page after reboots; no offline cache

For a new build, the simplest path is a Fire TV or Google TV smart TV plus the menu app installed from the TV's app store. Keep a $50 stick in the office as a spare.

Fire OS 8 sticks such as the Fire TV Stick 4K Plus (2025) and 4K Max (2023) are listed by Amazon as Android 11 based, which is what most Android TV menu apps target. The 2026 Fire TV Stick 4K and the 4K Select run Vega OS, so confirm support with your software vendor before buying those.

Step 4: Follow the design rules

Android's TV design guide tells app developers to design on a 960 by 540 dp canvas and keep important content inside a 5% margin on every edge because older TVs crop the edges (Android TV layouts guide). The same rules apply to your menu layout.

  1. Font size. Start with item names at 48 to 60 px and prices at 56 to 72 px on a 1080p layout for a 43-inch screen read from about 10 feet, then test it in the room. Go bigger for drive-thru or anything over 15 feet. If you cannot read it from the back of the queue, it is too small, whatever the number says.
  2. Contrast. Light text on a dark background or dark text on a light background. Avoid photos behind text. Keep one accent color for "new" or "special" tags.
  3. 1080p vs 4K. Most menu apps render at 1080p and the TV upscales. 4K only matters if you show large photos and the guest stands closer than 6 feet. Do not pay for 4K in the player; pay for brightness and size in the TV.
  4. 16:9 layout and columns. Design for 16:9 landscape. Two columns on a 43-inch screen, three on a 55-inch. Each column holds 6 to 9 items. If you need more, split by category across screens instead of shrinking the type.
  5. Keep the 5% safe margin empty on every edge so nothing is cut off on a TV with overscan.
  6. Limit motion. A slow crossfade between two screens is fine. Scrolling text is not; it is hard to read and distracts the line.

Step 5: Connect it to your POS menu

Prices change. Retyping them on a board is how a $12.49 item ends up ringing at $11.99 at the register. Choose menu software that reads the menu from your POS, so the board shows the same names and prices the register charges.

If you run Clover, look for a board app that pulls items, categories and prices from your Clover inventory and refreshes when you change them in the Clover dashboard. See how Orqestra works with Clover and the TV menu boards feature for what that looks like with an Android TV / Fire TV app and a browser fallback. The same idea applies to Square and Toast: the board should subscribe to the POS catalog, not hold its own copy.

Mark items you do not want on the board (modifiers, catering trays, "open food") as hidden in the board app, and decide whether the board shows a sold-out state when the POS marks an item out of stock.

Step 6: Schedule dayparts

  1. Create one layout per daypart: breakfast, lunch and dinner, or just "all day" plus a happy-hour overlay.
  2. Set a weekly schedule on each screen. Make the breakfast board end 15 minutes after your breakfast cutoff so the last guests in line still see it.
  3. Add a holiday override list so you are not editing boards at 6 a.m. on a holiday.
  4. If your software supports it, give one screen a "specials" slot that managers can change from a phone.

Step 7: Test before you open

  1. Stand at the back of the queue and read every price out loud. Fix anything you squint at.
  2. Pull the plug on one TV, wait 30 seconds, plug it back in. The board should come back on its own with no remote. If the TV lands on its home screen instead, enable the app's autostart setting or set the TV's input to boot to the app.
  3. Change a price in the POS and time how long the board takes to update.
  4. Check at night with the lights at their dimmest and at noon with sunlight on the glass.
  5. Photograph each screen and keep the photos for the next time you reprint anything.

Worked example: a 3-TV counter-service setup

A 1-location taco shop doing $70k a month wants three 43-inch landscape boards above the counter: tacos and plates, drinks and sides, and a specials board. Prices seen 2026-10-27 as linked above.

ItemQtyUnit priceTotal
Insignia 43-inch F50 4K Fire TV (built-in Fire TV, no stick needed)3$149.99$449.97
Amazon Basics full-motion wall mount3$20.99$62.97
Spare Fire TV Stick 4K Select for the office1$49.99$49.99
Surge strip and cable raceway1$30 to $60 (range, not verified)$45
Installation1$0 DIY, or a local handyman quote$0
Hardware total$607.93

Software is the variable. With a free tier or a board that comes with your POS app, year-one software is $0. At $8 to $20 per screen per month, which is the span between the Yodeck Basic plan ($8 per screen per month on Yodeck pricing, seen 2026-10-27) and the ScreenCloud Core plan ($20 per screen per month billed yearly on ScreenCloud pricing, seen 2026-10-27), three screens add $288 to $720 a year. The digital menu board cost breakdown walks through two and six-screen budgets, and the free digital menu board software roundup lists what each free tier limits.

If the same shop chose commercial displays, the three screens alone would be $2,227.17 at the BE43D-H price above, plus $179.97 for three Fire TV Stick 4K players, so about $2,470 before mounts. That is the right choice for 16-hour days or a sun-facing window, and the wrong one for a shop open 10 hours a day.

Common mistakes

  • Buying the TV before measuring the wall and the viewing distance, then discovering 43 inches is too small from 14 feet.
  • Typing prices into the board by hand instead of syncing from the POS. Every menu change then becomes two jobs and the second one gets skipped.
  • Picking a stick model the menu app does not support. Check the vendor's device list against the exact model number before ordering.
  • Powering a stick from the TV's USB port. It browns out and reboots in a loop.
  • Filling every pixel. A board that lists 40 items in 24 px type is a printed menu on a screen. Cut items or add a screen.
  • Skipping the power-cut test. The first time the power blinks on a Saturday, you find out whether the boards come back on their own.
  • Leaving the TV on its retail demo mode or with motion smoothing on. Turn both off in the TV settings before mounting.