· Orqestra Team · 8 min read
Restaurant Par Levels: How to Set Them (Formula + Example)
Par levels are the stock you want on hand right after a delivery. Here is the par level formula, how to get usage from counts, a 5-item example and a template.
A par level is the quantity of an item you want on hand right after a delivery arrives, enough to last until the next delivery plus a small buffer. The formula is: par = (average daily usage × days between deliveries) + safety stock. Average daily usage comes from your weekly inventory counts, days between deliveries comes from your vendor schedule, and safety stock is usually one extra day of usage for perishables.
Once pars are set, ordering becomes subtraction. Order quantity = par − on hand, rounded up to the vendor's pack size. This article gives the formula, how to pull usage from counts, a worked example for five items, a template table, and when to revisit the numbers.
The par level formula
Par = (Average daily usage × Days between deliveries) + Safety stock
Three inputs:
- Average daily usage: how much of the item you go through on a typical day, in the unit you count in (pounds, cases, quarts, bags).
- Days between deliveries: the longest gap between two deliveries of that item. If your produce vendor comes Monday and Thursday, the gaps are 3 and 4 days, so use 4.
- Safety stock: a buffer for a busy day or a late truck. For most perishables one day of usage is enough. For items that are hard to substitute (a specialty flour, a particular cheese) use two days.
Most published versions of the formula use "lead time" instead of days between deliveries. Nory writes it as "Par Level = (Average Daily Usage × Lead Time in Days) + Safety Stock" (Nory), and UpMenu gives the same structure as "(average daily sales x lead time) + safety stock" (UpMenu). The two are the same idea. Lead time is the time from placing an order to receiving it. For a restaurant on a fixed delivery schedule, what matters is how many days a delivery has to cover, which is the gap between deliveries. If you order ad hoc rather than on a schedule, use lead time plus the days until you will next check stock.
The reorder calculation that goes with it:
Order quantity = Par − On hand, rounded up to a whole pack
If on hand is above par, order nothing.
How to get average daily usage from counts
You do not need a recipe database to find usage. Two weekly counts and the invoices between them give it to you.
Usage for the period = Beginning inventory + Purchases − Ending inventory
Average daily usage = Usage ÷ Days in the period
Example for chicken thighs: last Monday's count was 150 lb, you received 200 lb during the week, this Monday's count is 126 lb. Usage = 150 + 200 − 126 = 224 lb over 7 days, so average daily usage = 32 lb.
Use at least three or four weeks of counts before trusting the average. One week with a catering order in it will set a par that is too high for the next two months. If you are not counting weekly yet, the inventory count sheet guide covers the routine, and the count sheet template has the columns.
Steps to set pars for your whole list
- List the items you order regularly, grouped by vendor. Most single-location restaurants have 120 to 250.
- Fix the count unit for each item (case, bag, pound, quart) and use the same unit for usage, par and on hand.
- Pull the last four weekly counts and the invoices between them. Compute usage per week, then divide by 7 for daily usage. Use the average of the four weeks, but look at each week and drop any with an event that will not repeat.
- Write down the delivery schedule per vendor and the longest gap in days for each item.
- Set safety stock: one day of usage for most items, two days for anything with a single supplier or a long lead time, zero for shelf-stable items you can pick up locally in a pinch.
- Compute par with the formula and round up to the pack size the vendor sells.
- Put the par on the count sheet next to each item so the reorder quantity is computed at count time.
- Review the pars after four weeks. If an item ran out or you threw product away, adjust that item, not the whole list.
Worked example: five items
A single-location restaurant doing about $95,000 a month. Protein and dairy arrive Monday and Thursday (longest gap 4 days). Dry goods arrive once a week on Tuesday (7 days). Usage is the average of the last four weeks of counts.
| Item | Unit | Daily usage | Days between deliveries | Safety stock | Par (computed) | Par (rounded) | On hand | Order |
|---|---|---|---|---|---|---|---|---|
| Chicken thighs | lb (40 lb case) | 32 | 4 | 32 | 160 | 160 (4 cases) | 60 | 100 lb (3 cases) |
| Paneer | 5 lb block | 1.1 | 4 | 2 | 6.4 | 7 | 3 | 4 |
| Heavy cream | Quart | 3.2 | 4 | 4 | 16.8 | 17 | 6 | 11 |
| Basmati rice | 20 lb bag | 0.6 | 7 | 1 | 5.2 | 6 | 4 | 2 |
| Cooking oil | 35 lb jug | 0.3 | 7 | 1 | 3.1 | 4 | 1 | 3 |
How each row was computed:
- Chicken thighs: (32 × 4) + 32 = 160 lb. The vendor sells 40 lb cases, so par is 4 cases. On hand is 60 lb, so the order is 100 lb, which rounds up to 3 cases (120 lb). The extra 20 lb is the cost of buying in cases, not a reason to lower the par.
- Paneer: (1.1 × 4) + 2 = 6.4 blocks, rounded up to 7. Safety stock is two days because the paneer supplier is the only one in town the kitchen will accept.
- Heavy cream: (3.2 × 4) + 4 = 16.8 quarts, rounded to 17. On hand 6, order 11.
- Basmati rice: (0.6 × 7) + 1 = 5.2 bags, rounded to 6. Weekly delivery means the par has to cover seven days.
- Cooking oil: (0.3 × 7) + 1 = 3.1 jugs, rounded to 4. Rounding 3.1 to 3 would mean running the last day with no buffer.
Notice the rice and oil pars look high relative to daily usage. That is the weekly delivery schedule, not an error. If you want lower pars on dry goods, the lever is a second weekly delivery, and the vendor may charge a minimum for it.
Template: par level sheet
Copy this layout into your count sheet. The first five columns are set once and revisited quarterly. The last two change every count.
| Item | Daily usage | Delivery interval (days) | Safety stock | Par | On hand | Order |
|---|---|---|---|---|---|---|
| = (usage × interval) + safety | = par − on hand |
Keep the unit next to the item name. Keep the vendor pack size in a note so whoever places the order rounds correctly. When the sheet lives in software, the par and order columns compute themselves at count time; the inventory feature in Orqestra works from this same structure and turns the order column into a purchase request.
When to revisit pars
Pars go stale. Revisit the affected items, not the whole list, when any of these happens:
- Seasonality. Patio season, holidays and the January slowdown change usage by 20% or more on many items. Recompute usage from the last four weeks at the start of each season rather than carrying a summer par into November.
- Menu changes. A new dish or a dropped one changes usage on every ingredient it touches. Set a provisional par from the recipe and the expected sales mix, then replace it with real usage after four weeks.
- Vendor or schedule changes. Moving from two deliveries a week to one doubles the days between deliveries, which roughly doubles the par.
- Repeated stockouts or waste on one item. Both are the par telling you it is wrong. A stockout means usage went up or safety stock is too thin. Waste means the par is above real usage, or the item's shelf life is shorter than the delivery interval.
- Price shifts. A par is a quantity, not a dollar amount, but a jump in unit cost is a good moment to confirm you are not holding more of an expensive item than you need.
A quarterly review of the full list, plus item-level fixes as they come up, is enough for most independent restaurants.
How pars connect to food cost
Pars control the gap between what you buy and what you sell. Too high and product spoils before it is used, which shows up as actual food cost above theoretical. Too low and you run out, substitute, or pay for an emergency run to the grocery store. Both are visible in the theoretical vs actual food cost comparison, which is the best check on whether your pars are doing their job.
Common mistakes
- Setting par from gut feel. "We usually have about four cases" is how most pars start, and it is why most pars are 20% to 40% too high. Compute usage from counts.
- Using the shortest delivery gap instead of the longest. If deliveries are Monday and Thursday, the par has to cover Thursday to Monday, which is 4 days, not 3.
- Mixing units. Usage in pounds and par in cases produces an order that is wrong by a factor of 40. Pick one unit per item.
- Rounding down. 3.1 jugs is 4 jugs. The decimal is the buffer disappearing.
- One safety stock for everything. One day is right for most items, but a single-source specialty item needs two, and a shelf-stable item you can buy at a local store needs none.
- Never revisiting. A par set in July will leave you short in December or over-stocked in January. Put a quarterly review on the calendar.
- Treating par as the order. Order = par − on hand. If someone orders the par quantity on top of what is already on the shelf, you have twice what you need.
- Skipping the count. Pars only work when on hand is a real number from this week. An estimate from memory gives an order that is as rough as the guess.